WoodRiver #7 Jointer Plane

WoodRiver #7 Jointer Plane-

The No. 7 is known as a jointer. It features the same blade and width as the No. 6, but it is 22" long (41/4" longer) and weighs 91/2 lbs. (nearly 2 lbs. heavier), making it almost the same weight as a Stanley No. 8. The No. 7 is used for truing edges prior to glue-up and flattening boards or large surfaces like tabletops. We found the extra heft came in handy when dealing with any grain that might have given a lighter plane trouble and was less tiring to use. V3: Like our previous WoodRiver Bench Hand Planes, our version 3 is based on the reliable Bedrock design and features heavy, stress-relieved ductile iron castings, fully machined adjustable frogs and A-2 blades, but we took the opportunity between manufacturing runs to do a critical review and make a few improvements. Weve changed the shape of the rear tote and increased the diameter of the blade adjustment wheel to make advancing the blade a bit easier. We improved the lateral adjustment lever and added a traditional style beari

. WoodRiver #7 Jointer Plane

WoodRiver #7 Jointer Plane

WoodRiver #7 Jointer Plane

qwqwqw/B0073RH4Q6/ttttt gggggg/41b85lNBjtL.jpgqqqq


☞ Check The Lowest Price ☜
ccccc

qwqwqw/B0073RH4Q6/ttttt ccccc

WoodRiver #7 Jointer Plane Features :

• 2-7/8" W x 22" L with 2-3/8" W blade
• Modeled after the Bedrocks, Stanley Tool's very best line; Commonly known as a jointer plane
• WoodRiver hand planes feature the same heavy castings (5 lbs.) and fully machined frogs
• Lightly finished Bubinga handles for comfort and control; Tools require minimal tune-up prior to use
• Soles and sides are machined flat and square within tightly held tolerances

WoodRiver #7 Jointer Plane Reviews
,
9.5 out of 10. based on 649 ratings